-
Atlanta Airport, Georgia – Concourse C
This project was ACM panels put up on Concourse C at Hartsfield-Jackson IAP, in Atlanta, GA. The client was SECO Architectural Systems. Runkle Consulting provided shop drawing review and engineering guidance for the erection of the panels.
-
City of Atlanta Civil & Human Rights Museum
This project consisted of aluminum cladding erected by SECO Architectural Systems on the exterior of the Atlanta Civil Rights Museum. We performed the review of the shop drawings and made engineering recommendations for the attachment of the paneling to comply with Code requirements for wind loading.
-
Container Buildings Not Made in USA? Go or No Go?
Periodically I get e-mails from companies in China about container structures fabricated offshore. I also get calls from people that want to fabricate in an offshore location for the US. I have also talked to people in other countries that successfully built container structures that were fabricated in China, so it’s not impossible. SeaCon –…
-
The Tallest Container Building in North America
Ida on McKinley is a multi-use development made from shipping containers on 3rd Street and McKinley Street in Phoenix, AZ. The architect is Local Studio, the structural engineer of record is Schneider Structural Engineers. Runkle Consulting, Inc worked under Schneider to design the shipping container part of the structure. The building is 7 stories high,…
-
Affordable Shipping Container Apartment Complex in St. Pete, FL
This project is a 34 unit apartment affordable shipping container complex in St. Petersburg that is being constructed as affordable housing. Each unit is one 40′ container, and includes a bedroom, shower, kitchen, and living room area. The complex includes a laundry room and bike storage room. The Architect on this project was Carbon Design…
-
Shipping Container Apartments – New Haven, CT
This shipping container apartment complex was challenging because it was located in a coastal flood zone and a high wind area in New Haven, CT. It sets up above the ground about 10 feet. This added a bit of complexity for stability of the foundations and the walls supporting the building. The developer of this…
-
Foundation Failure – The Nightmare of Your Dreamhouse on the Hill
In this video I talk about how that wonderful house on the hill can be your worst nightmare. That house that overlooks a nice wooded valley and has a wonderful walk out basement. However, can bring you a lot of problems in the future. To illustrate, I discuss a little bit of the geology concerned…
-
Leveling Up and Stiffening a Sagging Floor
In this video, we are leveling up and stiffening a sagging floor. The floor sagged over time because the builder didn’t provide properly designed trusses. We stiffened the trusses and jacked up the floor to fix the problem, and this is how we did it. The contractor is David Moore with Structures, Inc. I found…
